M22 G HVLP Manual Airspray Spray Gun Gravity

M22 G HVLP is THE gravity-fed gun solution to tackle material loss issues. Moreover, it delivers a very high finish quality for low viscosity material and with a nice operator comfort.

One of the best transfer efficiencies (up to 76%)
The finest atomization quality for low viscosity material
Perfectly balanced body: improved ergonomics

► Technical manual

Where to buy?

M22 G HTI E5 K HVLP Manual airspray spraygun gravity

Associated informations

Description

One of the best transfer efficiencies (up to 76%)
The finest atomization quality for low viscosity material
Perfectly balanced body: improved ergonomics

► Technical manual

Performance

Very fine atomization for low viscosity material
Reduced overspray and perfectly balanced fan

Productivity

Ergonomic due to a very comfortable body design
EZ-Adjust aircap for easy rotation adjustment
Reduced trigger effort due to its in-line air valve
One of the lightest manual spray guns in its category & perfectly balanced: reducing repetitive strain injuries (RSI)
Large range of projectors (aircap + nozzle + needle) & stainless steel fluid passages (compatible with a large range of solvent and water-based materials) allowing it to be used for all kinds of applications

Sustainability

Designed from high-end materials (stainless steel, anodized forged aluminum body, brass) in conjunction with SAMES KREMLIN's machined projectors (aircaps + nozzle + needle) ensure extended product life
Reduction of the number of components makes for easy and quick maintenance

M22 G HVLP is a decisive asset to optimize transfer efficiency and reduce material costs.

Technical data table

Designation	Value	Unit: metric (US)
Maximum Fluid Outlet	280 (9.8)	cc/min (oz/min)
Minimum Fluid Outlet	128 (4.5)	cc/min (oz/min)
Maximum Air Pressure	6 (87)	bar (psi)
Recommended Air Pressure (min)	2 (29)	bar (psi)
Air Consumption	27.2 (16)	m3/h (cfm)
Transfer Efficiency	76	%
Maximum Fluid Temperature	50 (122)	°C (°F)
Air Inlet	M 1/4" NPS
Wetted Parts, Stainless Steel	♦
Weight	680 (24)	g (oz)
PH	5 - 8
Tips / Nozzle	♦

Technologies

HVLP

This technology ensures high transfer efficiency (minimum 65%) with a low pressure of atomizing air (0.7 bar maxi).

Documents

Select all documents

Leaflet M22 A-G Manual Airspray Spray Gun (English version) SAMES KREMLIN

Format : application/pdf
Size : 482Ko

Select the document

Catalog airspray range sames kremlin

Format : application/pdf
Size : 6Mo

Select the document

General Catalog (only for North American market) SAMES KREMLIN

General Catalog North America

Format : application/pdf
Size : 6Mo

Select the document

Materials

Primer Epoxy

Epoxy primer/sealer is a non-porous finish that is typically recommended as the first base coat over bare steel.

Primer Epoxy Multi-Component

Epoxy primer/sealer multi-component is a non-porous finish base mixed with a hardener that is typically recommended as the first base coat over bare steel.

Primer Polyurethane Multi-Component

Designed to hide profile & surface imperfections, multi-component polyurethane primers & sealers improve adhesion of top coats to the substrate due to the addition of a hardener.

Primer Water-Based

Designed to hide profile & surface imperfections, water-based primers & sealers are environmentally friendly.

Primer Polyurethane

Designed to hide profile & surface imperfections, polyurethane primers & sealers promote adhesion of top coats to the substrate.

Water-Based Stains

Water-Based Wood Stains have all the advantages of oil-based stains. They spread easily, can be repaired, blend effortlessly & have plenty of open time. The thicker formula allows for controlled penetration, which will reduce blotching on softer woods such as Aspen, Pine & Maple.

Solvent-Based Stains

A wood stain consists of a colorant suspended or dissolved in an agent or solvent. Colored, or ''stained", finishes do not penetrate the pores of the wood to any significant degree.

CARC Polyurethane Multi-Component

Chemical Agent Resistant Coating (CARC) can be two-component polyurethane paint commonly applied to military vehicles to provide protection against chemical & biological weapons.

Top Coat Polyurethane Multi-Component

Polyurethane Top Coat is a two- or three-pack isocyanate-cured polyurethane that gives a durable, high gloss finish. Isocyanates included in the hardener are moisture-sensitive & need a specific process for insulating the circuit.

Top Coat Epoxy

Top Coat Epoxys are used for decorative flooring applications, such as Terrazzo flooring, chip flooring & colored aggregate flooring.

Top Coat Epoxy Multi-Component

Two-part epoxy coatings were developed for heavy duty service on metal substrates & use less energy than heat-cured.

Top Coat Water-Based

Water-based polyurethane is popular because of its low odor & low toxicity. It goes on clear without adding a faint color like oil-based versions do & it dries much faster.

Top Coat Polyurethane

Polyurethane Top Coat gives a durable, high gloss finish.

Metallic Epoxy

The newest metallic epoxy system on the market allows contractors to heighten the effects & make floors look three-dimensional.

Metallic Water-Based

Polyurethane water-based coatings offer a very high chemical/physical resistance & steel effect & are environmentally friendly.

Metallic Epoxy Multi-Component

A two-component 100%-solid epoxy blended with metallic pigments, Metal Fusion is self-leveling, allowing easy application & seamless floor surfaces.

Metallic Polyurethane

Polyurethane coatings are particularly recommended for application to surfaces subject to high levels of wear & tear where excellent chemical/physical resistance is required. The metallic parts will give a steel effect.