SAMES KREMLIN | Cyclomix™ Multi Airspray Plural Component Electronic Mixing & Dosing System

Description

Elimination of manual mixing errors
Material savings guaranteed
Always fresh material on demand

► Technical manual

Performance

Consistently precise mixed material due to the unique static mixer design and direct injection - inject mix technology
Unsurpassed +/- 1% mixing accuracy even on the most demanding materials
Highly accuracy flow meters

Productivity

Ideal for pot-life materials ≥ 15 minutes
Intuitive use - Touch-screen control
User-friendly with the Autowash (off production gun automatic monitoring)
Minimum material and solvent waste due to automatic flushing and material generation
The operator can control the system while in the spray booth using the glass kit option

Sustainability

Consistent product quality = Less rework cost
Lower cost of ownership
Reduces hazardous waste

CYCLOMIX™ Multi PH metering system version is also available from 1 to 7 bases for acid catalysts coatings (pH 0.5)

Technical data table

Designation	Value	Unit: metric (US)
Electrical Power	115 / 230 - 75	V - W
Ratio	0.6/1 > 30/1	X/1
Maximum Fluid Pressure	2-200 (29-2900)	bar (psi)
Recommended Fluid Pressure	2-175 (29-2537)	bar (psi)
Maximum Fluid Output	2500 > 4000	cc/min (oz/min)
Number of Products	7-3-2	base-catalyst-solvent
Maximum Temperature	50	°C (°F)
Robot Communication	yes
Air Inlet	F 1/4" BSP
Fluid Inlet	M 1/2" JIC
Fluid Outlet	F 1/4" BSP
Number of Mixed Products	2	2K
Fluid Viscosity (min-max)	30 > 5000 cps	in CA4 seconds (or centipoise cps)
Stainless Steel, PEHD Wetted Parts	♦
Weight	70 (154)	g (oz)
Number of Products	10	Max
Number of A Components	3/7	Min/Max
Number of B Components	1/3	Min/Max

Technologies

Injectmix

Used in every SAMES KREMLIN electronic or mechatronic dosing machine, Injectmix technology allows injecting a custom catalyst volume into a continuous flow of base - directly in a high performance mixer, thus guaranteeing the mixing quality.

Documents

Select all documents

Leaflet Cyclomix® Multi Plural Component Electronic Mixing & Dosing System 5English version) SAMES KREMLIN

Format : application/pdf
Size : 464Ko

Select the document

Catalog airspray range sames kremlin

Format : application/pdf
Size : 6Mo

Select the document

General Catalog (only for North American market) SAMES KREMLIN

General Catalog North America

Format : application/pdf
Size : 6Mo

Select the document

Materials

Primer Epoxy

Epoxy primer/sealer is a non-porous finish that is typically recommended as the first base coat over bare steel.

Primer Water-Based

Designed to hide profile & surface imperfections, water-based primers & sealers are environmentally friendly.

UV Material Epoxy Multi-Component

UV-resistant epoxy systems mixed with hardener cure faster & in moist conditions.

UV Material 100% Solid

UV coatings can be formulated up to 100% solids so that they have no volatile component that contributes to pollution.

UV Material Water-Based

Water-based UV coatings can be considered aesthetically equivalent to bi-component acrylic & polyurethane solvent-based coatings. The range is composed of both pigmented & transparent products.

UV Material Epoxy

UV curable epoxy systems do not require the addition of curing agents. They cure within minutes, or even seconds, and have unlimited working times.

UV Material Polyurethane Multi-Component

The UV polyurethane multi-components are especially designed for very strong UV stability. Mixing with hardener gives very high durability & UV resistance.

UV Material Polyurethane

The UV polyurethanes are especially designed for UV stability, The coating is long lasting, offers excellent substrate protection, provides an attractive finish & is user-friendly.

Top Coat Polyurethane Multi-Component

Polyurethane Top Coat is a two- or three-pack isocyanate-cured polyurethane that gives a durable, high gloss finish. Isocyanates included in the hardener are moisture-sensitive & need a specific process for insulating the circuit.

Penetrant (NDT Testing)

Dye penetrant inspection (DPI), also called liquid penetrant inspection (LPI) or penetrant testing (PT), is a widely applied & low-cost inspection method used to locate surface-breaking defects in all non-porous materials (metals, plastics, or ceramics). The penetrant may be applied to all non-ferrous materials & ferrous materials, although for ferrous components magnetic particle inspection is often used instead for its sub-surface detection capability.

Top Coat Epoxy

Top Coat Epoxys are used for decorative flooring applications, such as Terrazzo flooring, chip flooring & colored aggregate flooring.

Top Coat Epoxy Multi-Component

Two-part epoxy coatings were developed for heavy duty service on metal substrates & use less energy than heat-cured.

Top Coat Water-Based

Water-based polyurethane is popular because of its low odor & low toxicity. It goes on clear without adding a faint color like oil-based versions do & it dries much faster.

Top Coat Polyurethane

Polyurethane Top Coat gives a durable, high gloss finish.

Acid Catalyst Polyurethane Multi-Component

Multi-Component Epoxy Acid Catalyzing (AC) systems require a hardener or catalyst to dry/cure, which works by starting & maintaining the binder's curing process until the chemical reaction is complete. The solvent evaporates prior to & during the chemical reaction concluding a final film of lacquer, paint or filler. The catalyst is moisture-sensitive and requires a Flowmax® technology protection.

Acid Catalyst Epoxy Multi-Component

Multi-Component Epoxy Acid Catalyzing (AC) systems require a hardener or catalyst to dry/cure, which works by starting & maintaining the binder's curing process until the chemical reaction is complete. The solvent evaporates prior to & during the chemical reaction concluding a final film of lacquer, paint or filler. Curing times of AC products can be dramatically accelerated with heat application.

Metallic Epoxy

The newest metallic epoxy system on the market allows contractors to heighten the effects & make floors look three-dimensional.

Metallic Water-Based

Polyurethane water-based coatings offer a very high chemical/physical resistance & steel effect & are environmentally friendly.

Metallic Epoxy Multi-Component

A two-component 100%-solid epoxy blended with metallic pigments, Metal Fusion is self-leveling, allowing easy application & seamless floor surfaces.

Metallic Polyurethane

Polyurethane coatings are particularly recommended for application to surfaces subject to high levels of wear & tear where excellent chemical/physical resistance is required. The metallic parts will give a steel effect.