Enamel Water-Based

Enamel paint air dries to a hard, typically glossy finish, and is used for coating surfaces that are outdoors or otherwise subject to hard wear or temperature changes.

Enamel-Material

Products
Solutions

Informations associées
- Products
- Solutions

Products

A28 HPA Automatic Airspray Spray Gun

The automatic A28 low pressure spray gun benefits from the patented Superlife technology, recommended for enamels, high solids & solvent-free materials and strongly improving the wet parts lifetime.

Airspray Back Pressure Fluid Regulator - Manual Control

This regulator has been designed to keep a constant pressure and a minimum product speed in a paint circulating line.

Airspray Fluid Regulator - Manual Control

The use of this manual control pressure regulator is the best way to get a high working precision. With continuous control of the product pressure a constant production quality can be achieved. Designed for low to medium viscosity materials.

Airspray fluid regulator - manual -integrated pilot

Airspray Fluid Regulator - Manual Drive and Integrated Pilot

The manual drive regulator with integrated pilot allows to keep a constant pressure. The use of this regulator is the best way to get a very high working precision. With the continuous control of the product pressure, it allows a constant production quality. Designed for low to medium viscosity materials.

Airspray Fluid Regulator - Piloted Control

This regulator can be piloted directly by pressurized air, allowing to change the product pressure at any time on the assembly line. Designed for low to medium viscosity materials.

Airspray Non-Stick Coating Fluid Regulator - Piloted Control

This regulator can be piloted directly by pressurized air, allowing to change the product pressure at any time on the assembly line. Designed for medium viscosity materials, this piloted control regulator is non stick coating.

Airspray Tanks

SAMES KREMLIN Airspray Tanks are dedicated to all the applications: from a light aluminum 2L (0.5 Gal) to feed one touch-up gun to a heavy duty 7 Bar (100 psi) 50L (13 Gal) fully Stainless Steel for high production.

AP 1000

Measuring Device Resistivohmeter.

CYCLIX 20-40 Drum Cover Agitators

Cyclix gear drive agitators for open top 200 liter (55 gal) drum featuring a stainless steel cover mounted on a single post elevator for quick material changes.

CYCLIX 200 Drum Cover Agitators

Cyclix gear drive agitators for open top 200 liter (55 gal) drum featuring a stainless steel cover mounted on a single post elevator for quick material changes.

M22 P HPA Manual Airspray Spray Gun Pressure

M22 P HPA offers the widest projector choice to answer to most conventional spray needs. It is recommended for high-volume conventional spray applications or for high viscosity material.

M22 P HTV Manual Airspray Spray Gun Pressure

M22 P HTV uses SAMES KREMLIN's unique Vortex technology to enhance low viscosity material spraying on sharply profiled surfaces. It is also HVLP compliant.

M22 P HVLP Manual Airspray Spray Gun Pressure

M22 P HVLP delivers a very high finish quality for low viscosity material and optimizes transfer efficiency with an outstanding operator comfort.

M22 P WBE HPA Manual Airspray Spray Gun Pressure

The M22 P WBE HPA is a reinforced gun designed to resist to highly-abrasive water-based coatings in time. The HPA technology allows its use for high-volume conventional spray or high viscosity material applications.

PDM175 Airspray Diaphragm Compact Paint Pump

PDM 175 is a large capacity diaphragm pump, it is ideal for low pressure circulatings and feeding automatic guns.

Peristaltic Pump

Flow Management

PMP150 Airspray Diaphragm Paint Pump

PMP150 is our easiest pumping solution. It is a diaphragm pump (for application requiring a 1:1 ratio) and can be used with adhesive, medium viscosity or harsh coating.

PMP150 E Airspray Diaphragm Paint Pump

The PMP 150 E is a diaphragm pump with a 1:1 ratio, which benefits from special balls and seats to pump abrasive water-based coatings.

PMP150 Transfer Diaphragm-Airspray Paint Pump

The PMP 150 Transfer is a diaphragm pump, designed for fluid transfer applications. It can be used with low to medium viscosity material.

Pressure Pots

Our pressurized tanks are available from 5L (1.3Gal) capacity for economical solutions to feed Airspray guns (paints/adhesives) up to 52L (197 Gal) for the biggest application.

S3 G HPA Manual Airspray Spray Gun Gravity

The S3 G is our most compact and light gun, designed for tight area applications and where touch-ups are required. It is also an ideal solution for small hands.

S3 G HTI Manual Airspray Spray Gun Gravity

The S3 G is our most compact and ligth gravity gun designed for tight area applications and where touch-ups are required. S3 G HTI is the least energy consuming gun, and is HVLP compliant.

S3 P HPA Manual Airspray Spray Gun Pressure

The S3 P is our most compact and lightest gun, designed for tight area applications and where touch-ups are required. HPA Pressure technology enables high viscosity product spraying.

S3 P HTI Manual Airspray Spray Gun Pressure

The S3 P HTI is our most compact and lightest gun, designed for tight area applications and where touch-ups are required. It HVLP compliant to show an outstanding finish quality with very little product loss.

Solutions

HOW TO DESIGN an AUTOMATIC SOLUTION ?

This guide will help you to take the right path to a successful integration

FPro Manual Airspray Gun Easy Solution

This solution is a simple concept - with an FPro P airspray spray gun - for one or two painters for applying paint with a superior quality finish in almost avery market!

Navigation

Follow us !