M22 P HTI Manual Airspray Spray Gun Pressure

The M22 P HTI ensures a nice finish quality and transfer efficiency with an outstanding operator comfort. We strongly advise to use our new Air and Paint hoses to fully enjoy ergonomics of the solution "gun + hoses".

High transfer efficiency (up to 72%)
Good spray quality
Very nice manoeuvrability when used with our new hoses

► Technical manual

Where to buy?

Associated informations

Description

High transfer efficiency (up to 72%)
Good spray quality
Very nice manoeuvrability when used with our new hoses

► Technical manual

Performance

Fine atomization for low to medium viscosity material
Reduced overspray and perfectly balanced fan

Productivity

Ergonomic due to a very comfortable body design
EZ-Adjust aircap for easy rotation adjustment
Reduced trigger effort due to its in-line air valve
One of the lightest manual spray guns in its category & perfectly balanced: reducing repetitive strain injuries (RSI)
Large range of projectors (aircap + nozzle + needle) & stainless steel fluid passages (compatible with a large range of solvent and water-based materials) allowing it to be used for all kinds of applications

Sustainability

Designed from high-end materials (stainless steel, anodized forged aluminum body, brass) in conjunction with SAMES KREMLIN's machined projectors (aircaps + nozzle + needle) ensure extended product life
Reduction of the number of components makes for easy and quick maintenance

M22 P HTI shows good performances with very nice ergonomics.

Technical data table

Designation	Value	Unit: metric (US)
Maximum Fluid Pressure	6 (87)	bar (psi)
Maximum Fluid Outlet	400 (14)	cc/min (oz/min)
Minimum Fluid Outlet	200 (7)	cc/min (oz/min)
Maximum Air Pressure	6 (87)	bar (psi)
Recommended Air Pressure (min)	2.5 (36.2)	bar (psi)
Air Consumption	23 - 29 (11.9 - 17.1)	m3/h (cfm)
Transfer Efficiency	72	%
Maximum Fluid Temperature	50 (122)	°C (°F)
Air Inlet	M 1/4" NPS
Fluid Inlet	M 3/8" NPS
Wetted Parts, Stainless Steel	♦
Weight	520 (18.3)	g (oz)
PH	5 - 8
Tips / Nozzle	♦

Technologies

Airspray HTI™

HTI Airspray technology is applied with 2 aircaps - E HVLP aircap & EP LVLP aircaps - resulting in outstanding finish quality for low to medium viscosity materials.

Documents

Select all documents

Leaflet M22 A-G Manual Airspray Spray Gun (English version) SAMES KREMLIN

leaflet M22 Airspray

Format : application/pdf
Size : 482Ko

Select the document

Catalog airspray range sames kremlin

Format : application/pdf
Size : 6Mo

Select the document

General Catalog (only for North American market) SAMES KREMLIN

General Catalog North America

Format : application/pdf
Size : 6Mo

Select the document

Materials

Primer Epoxy

Epoxy primer/sealer is a non-porous finish that is typically recommended as the first base coat over bare steel.

Primer Epoxy Multi-Component

Epoxy primer/sealer multi-component is a non-porous finish base mixed with a hardener that is typically recommended as the first base coat over bare steel.

Primer Polyurethane Multi-Component

Designed to hide profile & surface imperfections, multi-component polyurethane primers & sealers improve adhesion of top coats to the substrate due to the addition of a hardener.

Primer Water-Based

Designed to hide profile & surface imperfections, water-based primers & sealers are environmentally friendly.

Primer Polyurethane

Designed to hide profile & surface imperfections, polyurethane primers & sealers promote adhesion of top coats to the substrate.

Water-Based Stains

Water-Based Wood Stains have all the advantages of oil-based stains. They spread easily, can be repaired, blend effortlessly & have plenty of open time. The thicker formula allows for controlled penetration, which will reduce blotching on softer woods such as Aspen, Pine & Maple.

Solvent-Based Stains

A wood stain consists of a colorant suspended or dissolved in an agent or solvent. Colored, or ''stained", finishes do not penetrate the pores of the wood to any significant degree.

CARC Polyurethane Multi-Component

Chemical Agent Resistant Coating (CARC) can be two-component polyurethane paint commonly applied to military vehicles to provide protection against chemical & biological weapons.

Moisture-Sensitive Polyurethane Multi-Component

Catalyzed polyurethane clear coats and paints are prized for their durability and versatility around the world. They are used on everything from wood cabinetry, mill work and furniture to planes, trains, and automobiles. They are usually mixed with isocyanates in the hardener. The isocyanate component of polyurethane reacts with moisture in the air and form a hard crystalline structure.

Top Coat Polyurethane Multi-Component

Polyurethane Top Coat is a two- or three-pack isocyanate-cured polyurethane that gives a durable, high gloss finish. Isocyanates included in the hardener are moisture-sensitive & need a specific process for insulating the circuit.

Top Coat Epoxy

Top Coat Epoxys are used for decorative flooring applications, such as Terrazzo flooring, chip flooring & colored aggregate flooring.

Top Coat Epoxy Multi-Component

Two-part epoxy coatings were developed for heavy duty service on metal substrates & use less energy than heat-cured.

Top Coat Water-Based

Water-based polyurethane is popular because of its low odor & low toxicity. It goes on clear without adding a faint color like oil-based versions do & it dries much faster.

Top Coat Polyurethane

Polyurethane Top Coat gives a durable, high gloss finish.

Metallic Epoxy

The newest metallic epoxy system on the market allows contractors to heighten the effects & make floors look three-dimensional.

Metallic Water-Based

Polyurethane water-based coatings offer a very high chemical/physical resistance & steel effect & are environmentally friendly.

Metallic Epoxy Multi-Component

A two-component 100%-solid epoxy blended with metallic pigments, Metal Fusion is self-leveling, allowing easy application & seamless floor surfaces.

Metallic Polyurethane

Polyurethane coatings are particularly recommended for application to surfaces subject to high levels of wear & tear where excellent chemical/physical resistance is required. The metallic parts will give a steel effect.