PCS 05C3700 Quatro Airspray Paint Circulating System Pump

4 ball low pressure pump for mixing room optimization

Special design to pump high viscosity material: oil, grease, adhesive and sealants
Cup technology: easy lubrication
Modular conception: easy maintenance and servicing

► For configurations and part numbers, please refer to the Documents tab.

Where to buy?

05C3700 Airspray Quatro Paint Circulating System Pump

Associated informations

Description

Special design to pump high viscosity material: oil, grease, adhesive and sealants
Cup technology: easy lubrication
Modular conception: easy maintenance and servicing

► For configurations and part numbers, please refer to the Documents tab.

Performance

Quiet air motor with no icing effect
Low shear due to special design of paint passage, seats & balls

Productivity

Separate air command 87 psi (6 bar) to run pump from 7 psi (0.5 bar) prevents air motor stalling

Sustainability

Easy maintenance
Wide variety of cartridges designed for easy replacement: PE, PE+PTFE & PE+Leather

PCS 05C3700 QUATRO 4 ball pump ensures strong pumping even for viscous material.

Technical data table

Designation	Value	Unit: metric (US)
Pressure Ratio	5 : 1
Maximum Fluid Pressure	30 (434.8)	bar (psi)
Maximum Air Pressure	6 (87)	bar (psi)
Weight	113 (249.1)	kg (lbs)
Maximum Temperature	80 (176)	°C (°F)
Cylinder	3700 (125.1)	cc (oz)
Free Flow Rate	222 (58.6)	l/mn (gal/mn)
Motor Type	7200
Air Inlet	M 3/4" G
Height	1551 (610.6)	cm (in)
Width	282 (111)	cm (in)
Depth	400 (157.5)	cm (in)
Fluid output at 10 cycles/mn (recommended)	37 (9.8)	l/mn(gal/mn)
Air consumption at 15cycles/mn at 4 bar (60 psi)	72 (42.4)	m3/h(cfm)
Wet cup, upper body, piston rod, cylinder valve body, inlet tube	♦

Technologies

Chevron Sealing

A Chevron packing set independently reacts to pressure & automatically affects a seal.

Quatro

The Quatro™ technology is a high flow rate pumping process without pulsation technology & can be used as a feeding or boosting system.

Switch Motor

This technology involves reversing the process of the air motor to the pumps to avoid the pulse effect.

Cup Lub

A pump with a lubricant-filled cup on the top of the fluid section.

Triple Chrome Layer

This is a special treatment for very high sustainability & is applied to the piston of the fluid section of a pump.

Documents

Select all documents

Leaflet REXSON LP QUATRO Paint Circulating System Pump (English version) SAMES KREMLIN

Format : application/pdf
Size : 554Ko

Select the document

General Catalog (only for North American market) SAMES KREMLIN

General Catalog North America

Format : application/pdf
Size : 6Mo

Select the document

Materials

Primer Epoxy

Epoxy primer/sealer is a non-porous finish that is typically recommended as the first base coat over bare steel.

Primer Water-Based

Designed to hide profile & surface imperfections, water-based primers & sealers are environmentally friendly.

CARC Epoxy Multi-Component

Chemical Agent Resistant Coating (CARC) is a paint commonly applied to military vehicles to provide protection against chemical & biological weapons. The surface of the paint is engineered to be easily decontaminated after exposure to chemical warfare & biological warfare agents. The paint is also resistant to damage & removal by decontaminating solutions.

UV Material 100% Solid

UV coatings can be formulated up to 100% solids so that they have no volatile component that contributes to pollution.

UV Material Water-Based

Water-based UV coatings can be considered aesthetically equivalent to bi-component acrylic & polyurethane solvent-based coatings. The range is composed of both pigmented & transparent products.

UV Material Epoxy

UV curable epoxy systems do not require the addition of curing agents. They cure within minutes, or even seconds, and have unlimited working times.

UV Material Polyurethane

The UV polyurethanes are especially designed for UV stability, The coating is long lasting, offers excellent substrate protection, provides an attractive finish & is user-friendly.

Top Coat Epoxy

Top Coat Epoxys are used for decorative flooring applications, such as Terrazzo flooring, chip flooring & colored aggregate flooring.

Top Coat Water-Based

Water-based polyurethane is popular because of its low odor & low toxicity. It goes on clear without adding a faint color like oil-based versions do & it dries much faster.