SAMES KREMLIN | 20C100 Airmix® Paint Pump

Description

Ideal for Airmix® applications
High efficiency pump for maximum energy savings
Optimized construction for simple & quick maintenance

► Technical manual

Performance:

Economical with low air consumption
Quiet air motor to preserve work environment

Productivity:

Construction without dead zones for quick flushing & product changes
The mobile seal located on the piston ensures the mechanical cleaning of the fluid section internal wall during pump runs
Lower mobile single lip packing (GT) reducing friction for improved efficiency

Sustainability:

Fewer parts & simple design for extended lifetime
Polyfluid and PTFE graphite seal for improved wear resistance
Triple chrome layer piston for exceptional durability

Our wide selection of accessories allows you to create various configurations to meet your customer requirements.

Technical data table

Designation	Value	Unit: metric (US)
Pressure Ratio	20/1
Maximum Fluid Pressure	120 (1740)	bar (psi)
Weight	22 (48.5)	kg (lbs)
Maximum Temperature	60 (140)	°C (°F)
Cylinder	100	cc (oz)
Sound Level	78	dBa
Fluid Output at 30 cycles/mn	3 (0.8)	l/min (gal/mn)
Fluid Volume Per Cycle	100 (3.4)	cc
Air Consumption at 30 Cycles/mn at 4 Bar (60 psi)	21.6 (12.7)	m³/h (cfm)
Air Inlet	F 3/8" BSP
Fluid Outlet	M #5 JIC
Fluid Inlet	M 26x125
Number of cycles per liter of products	10
Sealing packing upper PTFE G + Polyfluid	♦
Wetted parts stainless steel	♦

Technologies

GT Sealing

This technology represents a new generation of sealing designed to extend the life of a pump piston.

Cup Lub

A pump with a lubricant-filled cup on the top of the fluid section.

2 Ball

2 ball pumping technology is highly utilized in fluid sections with one ball / seat for suction & the other ball / seat for feeding.

Documents

Select all documents

Leaflet 20C100 Airmix® 40C100 Airless Paint Pump (English version) SAMES KREMLIN

Format : application/pdf
Size : 520Ko

Select the document

catalog-airmix-range-sames-kremlin

Format : application/pdf
Size : 3Mo

Select the document

General Catalog (only for North American market) SAMES KREMLIN

General Catalog North America

Format : application/pdf
Size : 6Mo

Select the document

Materials

Primer Epoxy

Epoxy primer/sealer is a non-porous finish that is typically recommended as the first base coat over bare steel.

Primer Epoxy Multi-Component

Epoxy primer/sealer multi-component is a non-porous finish base mixed with a hardener that is typically recommended as the first base coat over bare steel.

Primer Water-Based

Designed to hide profile & surface imperfections, water-based primers & sealers are environmentally friendly.

Primer Polyurethane

Designed to hide profile & surface imperfections, polyurethane primers & sealers promote adhesion of top coats to the substrate.

Water-Based Stains

Water-Based Wood Stains have all the advantages of oil-based stains. They spread easily, can be repaired, blend effortlessly & have plenty of open time. The thicker formula allows for controlled penetration, which will reduce blotching on softer woods such as Aspen, Pine & Maple.

Solvent-Based Stains

A wood stain consists of a colorant suspended or dissolved in an agent or solvent. Colored, or ''stained", finishes do not penetrate the pores of the wood to any significant degree.

CARC Water-Based

Chemical Agent Resistant Coating (CARC) is available in a water-based solution for environmental protection.

CARC Epoxy Multi-Component

Chemical Agent Resistant Coating (CARC) is a paint commonly applied to military vehicles to provide protection against chemical & biological weapons. The surface of the paint is engineered to be easily decontaminated after exposure to chemical warfare & biological warfare agents. The paint is also resistant to damage & removal by decontaminating solutions.

CARC Polyurethane Multi-Component

Chemical Agent Resistant Coating (CARC) can be two-component polyurethane paint commonly applied to military vehicles to provide protection against chemical & biological weapons.

UV Material Epoxy Multi-Component

UV-resistant epoxy systems mixed with hardener cure faster & in moist conditions.

UV Material 100% Solid

UV coatings can be formulated up to 100% solids so that they have no volatile component that contributes to pollution.

UV Material Water-Based

Water-based UV coatings can be considered aesthetically equivalent to bi-component acrylic & polyurethane solvent-based coatings. The range is composed of both pigmented & transparent products.

UV Material Epoxy

UV curable epoxy systems do not require the addition of curing agents. They cure within minutes, or even seconds, and have unlimited working times.

UV Material Polyurethane Multi-Component

The UV polyurethane multi-components are especially designed for very strong UV stability. Mixing with hardener gives very high durability & UV resistance.

UV Material Polyurethane

The UV polyurethanes are especially designed for UV stability, The coating is long lasting, offers excellent substrate protection, provides an attractive finish & is user-friendly.

Top Coat Polyurethane Multi-Component

Polyurethane Top Coat is a two- or three-pack isocyanate-cured polyurethane that gives a durable, high gloss finish. Isocyanates included in the hardener are moisture-sensitive & need a specific process for insulating the circuit.

Top Coat Epoxy

Top Coat Epoxys are used for decorative flooring applications, such as Terrazzo flooring, chip flooring & colored aggregate flooring.

Top Coat Epoxy Multi-Component

Two-part epoxy coatings were developed for heavy duty service on metal substrates & use less energy than heat-cured.

Top Coat Water-Based

Water-based polyurethane is popular because of its low odor & low toxicity. It goes on clear without adding a faint color like oil-based versions do & it dries much faster.