M22 G HPA GSP Manual Airspray Spray Gun Gravity

M22 G HPA GSP is a unique combination of gravity and pressure technologies, invented by SAMES KREMLIN, It is the ideal solution for hard to atomize coatings such as high solids and waterbornes.

Spray high viscosity material with no pump or pressure pot
Outstanding atomization quality for a wide range of viscosity
Compatible with water-based materials

► Technical manual

Where to buy?

Associated informations

Description

Spray high viscosity material with no pump or pressure pot
Outstanding atomization quality for a wide range of viscosity
Compatible with water-based materials

► Technical manual

Performance

Very fine atomization for a high-gloss finish
Even fan pattern for easy application

Productivity

Ergonomic due to a very comfortable body design
EZ-Adjust aircap for easy rotation adjustment
Reduced trigger effort due to its in-line air valve
One of the lightest manual spray guns in its category & perfectly balanced: reducing repetitive strain injuries (RSI)
Large range of projectors (aircap + nozzle + needle) & stainless steel fluid passages (compatible with a large range of solvent and water-based materials) allowing it to be used for all kinds of applications

Sustainability

Designed from high-end materials (stainless steel, anodized forged aluminum body, brass) in conjunction with SAMES KREMLIN's machined projectors (aircaps + nozzle + needle) ensure extended product life
Reduction of the number of components makes for easy and quick maintenance

M22 G HPA GSP is a thorough alternative to pressure guns with the handling ability of a gravity gun.

Technical data table

Designation	Value	Unit: metric (US)
Maximum Air Pressure	6 (87)	bar (psi)
Recommended Air Pressure (min)	3 (43.5)	bar (psi)
Air Consumption	26.5 (15.6)	m3/h (cfm)
Transfer Efficiency	65	%
Maximum Fluid Temperature	50 (122)	°C (°F)
Air Inlet	M 1/4" NPS
Wetted Parts, Stainless Steel	♦
Weight	710 (25)	g (oz)
PH	5 - 8
Tips / Nozzle	♦
Included Accessories 1	0.6L pressure cup (max: 0.5 Bar)

Technologies

Airspray HPA™

HPA is an Airspray technology offering high power atomization.

Documents

Select all documents

Leaflet M22 A-G Manual Airspray Spray Gun (English version) SAMES KREMLIN

leaflet M22 Airspray

Format : application/pdf
Size : 482Ko

Select the document

Catalog airspray range sames kremlin

Format : application/pdf
Size : 6Mo

Select the document

General Catalog (only for North American market) SAMES KREMLIN

General Catalog North America

Format : application/pdf
Size : 6Mo

Select the document

Materials

Primer Epoxy

Epoxy primer/sealer is a non-porous finish that is typically recommended as the first base coat over bare steel.

Primer Epoxy Multi-Component

Epoxy primer/sealer multi-component is a non-porous finish base mixed with a hardener that is typically recommended as the first base coat over bare steel.

Primer Polyurethane Multi-Component

Designed to hide profile & surface imperfections, multi-component polyurethane primers & sealers improve adhesion of top coats to the substrate due to the addition of a hardener.

Primer Water-Based

Designed to hide profile & surface imperfections, water-based primers & sealers are environmentally friendly.

Primer Polyurethane

Designed to hide profile & surface imperfections, polyurethane primers & sealers promote adhesion of top coats to the substrate.

Water-Based Stains

Water-Based Wood Stains have all the advantages of oil-based stains. They spread easily, can be repaired, blend effortlessly & have plenty of open time. The thicker formula allows for controlled penetration, which will reduce blotching on softer woods such as Aspen, Pine & Maple.

Solvent-Based Stains

A wood stain consists of a colorant suspended or dissolved in an agent or solvent. Colored, or ''stained", finishes do not penetrate the pores of the wood to any significant degree.

CARC Polyurethane Multi-Component

Chemical Agent Resistant Coating (CARC) can be two-component polyurethane paint commonly applied to military vehicles to provide protection against chemical & biological weapons.

UV Material Epoxy Multi-Component

UV-resistant epoxy systems mixed with hardener cure faster & in moist conditions.

UV Material 100% Solid

UV coatings can be formulated up to 100% solids so that they have no volatile component that contributes to pollution.

UV Material Water-Based

Water-based UV coatings can be considered aesthetically equivalent to bi-component acrylic & polyurethane solvent-based coatings. The range is composed of both pigmented & transparent products.

UV Material Epoxy

UV curable epoxy systems do not require the addition of curing agents. They cure within minutes, or even seconds, and have unlimited working times.

UV Material Polyurethane Multi-Component

The UV polyurethane multi-components are especially designed for very strong UV stability. Mixing with hardener gives very high durability & UV resistance.

UV Material Polyurethane

The UV polyurethanes are especially designed for UV stability, The coating is long lasting, offers excellent substrate protection, provides an attractive finish & is user-friendly.

Top Coat Polyurethane Multi-Component

Polyurethane Top Coat is a two- or three-pack isocyanate-cured polyurethane that gives a durable, high gloss finish. Isocyanates included in the hardener are moisture-sensitive & need a specific process for insulating the circuit.

Top Coat Epoxy

Top Coat Epoxys are used for decorative flooring applications, such as Terrazzo flooring, chip flooring & colored aggregate flooring.

Top Coat Epoxy Multi-Component

Two-part epoxy coatings were developed for heavy duty service on metal substrates & use less energy than heat-cured.

Top Coat Water-Based

Water-based polyurethane is popular because of its low odor & low toxicity. It goes on clear without adding a faint color like oil-based versions do & it dries much faster.

Top Coat Polyurethane

Polyurethane Top Coat gives a durable, high gloss finish.

Metallic Epoxy

The newest metallic epoxy system on the market allows contractors to heighten the effects & make floors look three-dimensional.

Metallic Water-Based

Polyurethane water-based coatings offer a very high chemical/physical resistance & steel effect & are environmentally friendly.

Metallic Epoxy Multi-Component

A two-component 100%-solid epoxy blended with metallic pigments, Metal Fusion is self-leveling, allowing easy application & seamless floor surfaces.

Metallic Polyurethane

Polyurethane coatings are particularly recommended for application to surfaces subject to high levels of wear & tear where excellent chemical/physical resistance is required. The metallic parts will give a steel effect.