SAMES KREMLIN | VOLUREX Shot Meter

Description

Modular design
Reliable dispensing for material savings
Robot speed feed-back for enhanced bead control

Performance

Precise bead volume control with AUTOSTREAM control unit
TCPP - Tool Center Point Prediction for constant bead while robot speed varies
Integrated heating device for spray pattern control
Inline swirl head for reduced pressure losses

Productivity

Modular design for quick and easy maintenance
Chamber sizes available from 25 to 300 cc (interchangeable)

Sustainability

Maximum volumes 300cc
Maximum Ratio 33:1
Maximum Temperature 80 °C

Electric driven with integrated heating elements which enables accurate dispensing of viscous materials using the dedicated AUTOSTREAM controller.

Technical data table

Designation	Value	Unit: metric (US)
Power Supply	230
Air Inlet	6	JICM (NPTF)
Dispense Volume	25	cc
Weight	12 (26.46)	kg (lbs)
Flow Rate (instantaneous)	195	cc/min
Product Pressure	200 (2900)	bar
Max Product Temperature	80 (176)	°C
Stroke	86	mm
Power	515	W
Required Space	777 x 182 x 154	mm

Technologies

Swirl

Process by which compressed material dispenses from a nozzle with blowing air to form a spiral cord. Product spirals overlap as dispensed to form a thin film in the crash (set with doors).

LASD

Process by which the compressed material is dispensed allowing anti-vibration product pads to be applied in the form of wide striping for sound deadening purposes.

Bead

Process by which compressed material dispenses from a nozzle to form a cord. Used in engine sealing, gluing & mastic removal.

Droplets

Process by which compressed material dispenses from a nozzle to form a droplet. Material drops are positioned on hoods, doors & deck lids for anti-flutter bracket attachments.

Streaming

Process by which the compressed material is projected allowing an application a greater distance from the work piece.

Spraying

Process by which the compressed material is sprayed allowing an application a greater distance from the work piece. The width & amount of product dispensed depends on the nozzle type used.

Documents

Select all documents

Leaflet Volurex shotmeter (English version) SAMES KREMLIN

Format : application/pdf
Size : 500Ko

Select the document

Catalog REXSON dispense start range (English version) SAMES KREMLIN

Format : application/pdf
Size : 3Mo

Select the document

Materials

Silicone Sealant

Silicone sealants are used to protect & seal anything from the smallest silicon chip to the world's tallest skyscrapers.

Polyurethane Sealant

Polyurethane Sealant is abrasion resistant, odorless, remains flexible at low temperatures & is 100% urethane. It's quick & simple to use with its fast-setting capabilities that help to reduce downtime. The balanced, low-viscosity liquid components form an easy-to-use paste.

Polyurethane Sealant with Accelerator

Accelerator speeds up the setting process for 1K sealant to achieve rapid rain resistance & thorough setting of the accelerated foundation sealant.

Polyurethane Two-Component Sealant

Polyurethane Two-Component Sealant can be used in two or three components for increasing mechanical & chemical capabilities.

MS Polymer Sealant

Silyl modified polymers (SMP, also silane-modified polymers, silane-terminated polymers) are polymers (large, chained molecules) terminating with a silyl (SiH3) group. SMPs are the main components in solvent-free & isocyanate-free sealant and adhesive products. Typically the sealant products manufactured with silyl modified polymers have good adhesion on a wide range of substrate materials, and have good temperature & UV resistance.

Hybrid Sealant

Today polyurethane & silicone sealants are considered "high performance products." They deliver a significant adhesion, a good movement capability & are durable. However, these high performance products do have their limitations & disadvantages.

Adhesive STP

STP Polymers are the new generation environmentally friendly polymers that are replacing the isocyanate & solvent containing polyurethane resins to produce sealant & adhesive products that are safer & greener for the consumer & tradesman.

Adhesive Polyurethane

Polyurethane (PU or PUR for short) is not a single material with a fixed composition, but instead a range of chemicals sharing similar chemistry. It is a polymer composed of organic chain units joined by urethane or carbamate links. Most polyurethanes are thermosetting polymers & do not melt when heated unlike thermoplastic polyurethanes which do.

Adhesive Hybrid

Hybrid Adhesive Sealants are one component formulations that form robust, permanent & flexible bonds offering great adhesion to many materials for reliable performance, are paintable when wet for fast process time, have a fast skin time for a tack-free surface, are isocyanate-free for reduced health & safety concerns & resist degradation from sunlight for excellent aesthetics.

Adhesive 1K Accelerator

Additional accelerator used for polyurethane or silicone adhesives speed up the chemical reaction between the adhesive & the material they are bonding. Used often in the field where temperatures are lower to accelerate the bonding times.

Adhesive Acrylic

Adhesive acrylics were developed for structural bonding applications that require tensile, shear & peel strength combined with maximum impacts, stress & shock resistance.

Adhesive Epoxy

Epoxy adhesives, dependent upon the specific chemistry of the system & nature of the cross-linking available, adhere to a wide variety of materials. Some of the most important performance requirements include exceptional chemical & heat resistance, excellent adhesion & water resistance, as well as satisfactory mechanical & electrical insulating properties.

Water-Based Sound Deadener

Sound deadeners remove noise & unwanted vibrations by converting them into low grade heat & adding lightweight mass. The back-and-forth vibrations, or mechanical energy, are converted to low level thermal energy or heat, thereby providing structural resonance & impact noise deterrence.

Markets